7 DIY Light Table Plans For Kids To Have Fun
Light tables are a wonderful tool, a gentle light that helps examine X-rays, samples, or photo sheets. They are not just for adults; they are also beneficial for children who can utilize them to view sketches, camera reel photos, examine drawings, build blocks, and mix colors. These activities offer hours of fun while also enhancing their motor skills and abilities. This list included 7 Best DIY Light Table ideas that you can try using basic crafting skills and accessible materials. Let’s check them out!
DIY Light Table Plans
DIY Light Table Plans
Our DIY Light Table Ideas might be exactly what you need. They range to a variety of tastes and complexities, ranging from complicated to straightforward designs. Some of these tables are rechargeable and portable, while others repurpose existing tables or are constructed from the start. We even have an epoxy resin table fitted with touch sensor lights, which are sure to astound your guests by creating a decorative ambiance.
With each idea thoughtfully explained using visuals and step-by-step guides, they are easy to follow, even for beginners. Check out the full post, be inspired, and create your own light table. Not only will it beautify your vanity table, but it will also serve as a great tool for teaching them about color mixing.
Can you put sand on a light table?
Yes, you can put sand on a light table. There are numerous art projects and creative plays that involve using sand on a light table.
- Get a light table and some craft sand.
- Spread a layer of sand on the light table.
- Turn on the light.
- Use your fingers or little toys to make patterns or designs in the sand.
- Have fun and be creative with the designs.
- Always watch kids while they’re playing to keep them safe.
Laptop Light Table
This DIY Laptop Light Table is the perfect portable, rechargeable solution for designers, kids, and anyone who likes to work in low light. A unique feature is the integrated, rechargeable battery, offering freedom from tying up to wall outlets. So, why not give this DIY project a try!
Cut the 1×3 to the appropriate lengths following the designer’s plan. Assemble the box using screws and carefully router a groove around the interior for light placement. Cut a rectangle out of the top piece to make an opening for the light. Around this opening, router another groove for the light placement. Install the rectangular top to the box. Thread your light wires through the right hole in the top. Connect them to a Micro USB adapter and then to the USB port. Finally, fasten the whole setup to turn on and off.
Materials
- Qty 1 – 1 x 3 x 6′
- 3/4″ Wood Screws
- Wood Glue
- External Battery (cannot have on/off button)
- USB LED Strip
- USB to Micro USB adapter
- on/off switch
- USB Flush Mount Port
- Translucent Pattern Blocks
DIY Light Table For Kids
This project smartly turns a kids’ table into a brilliant light table using basic stuff. The use of a plastic sheet adds big strength, simple cleaning, and great light passing, creating colorful pictures for children. Perfect for learning while having fun, taking photos, or tracing drawings, this table promises non-stop crafty play.
Start by shaping the border parts and then join them together to make a square frame with screws and adhesive. Make a square hole inside the frame for the light panel using a power saw. Attach a clear light diffusing panel to the square frame with screws. At the bottom of the light table, make a small opening to fit a USB port. Link the LED lights, making sure to keep the correct arrangement of the positive and negative wires. Lastly, connect to a battery for power and keep the battery steady in its place.
Materials:
Make Your Own Light Table
This DIY Light Table is an innovative way to educate your kids about colors while having fun. The project is just perfect to keep your kids safe at home while playing with the butterflies and stacking them on each other to make different colors. It’s the perfect mix of cost-effectiveness and creativity!
Begin by flipping a baby wipes box inside out cutting a section from the top. Cut and attach pieces of wax and contact paper to the box cutout. Add another layer of contact paper to the top, and then reconstruct the box. Insert Christmas lights through the handles of the box. To create color “mixing” butterflies, use a butterfly shape cut from a cereal box, to which you’ve added cellophane paper cutouts. The light table is now ready for use.
Materials:
- A shadow box picture frame
- LED light strip 5 meters with 300 LEDs
- Power supply
- Red & black wire
- Foam
- Female connector for power supply
- On-off switch
- A handle (optional)
- Rubber pads are also known as bumpers (optional)
DIY Light Table For Toddlers And Kids
Bathing in gentle light, this light table brings a whole new outlook to playing with building blocks. The table features removable tops and revealing bins for storage or even sensory activities. High-strength acrylic sheets, along with battery-powered tap lights, provide the table’s soft light, enhancing translucent toys, especially building blocks. This DIY plan is ideal for an easy, engaging, and safe indoor activity for your toddlers and kids.
Start by removing the Flisat table tops and turning on the tap lights. Place these lights inside the cavities of the table. Replace the table tops with acrylic sheets, ensuring you leave the protective film on for a frosted appearance. Be mindful of potentially sharp edges on the acrylic sheets during assembly. Once completed, the light table is ready for use with translucent toys like Picasso Tiles.
Materials:
- IKEA Flisat Kid’s Table
- 2 Trofast Bins for the Flisat Table.
- 1-2 Sheets of Extra Strength Acrylic.
- 2-4 Large Battery-Powered Tap Lights.
AA batteries. - Any translucent toy will be fun.
Light Table For Under $50
Go back to your wonderful past using this DIY light table. It casts a soothing glow, perfect for viewing your old reel camera photos with your kids. The guide breaks down the making process into fine, digestible steps that you can easily follow – even if you are a crafting beginner!
Creating a light table involves several steps. Start with cutting the main body pieces and preserve the sawdust. Drill holes in the top piece and enlarge them later. Now, cut the plastic diffuser your light strips, and splice the cords. Assemble the light strips after pre-drilling the holes. The next task is to attach the strips inside the top section. Apply sawdust and glue mixture to fill the larger holes. Upon drying, sand it to smoothness, and finally, fasten the diffuser with the photoflood light.
Materials:
- One 1X4 – 6ft board
- One piece of 3/4 inch plywood 11 1/2 inches X 21 1/2 inches
- Two 18-inch length Undercabinet Fluorescent light fixtures.
- One 18-gauge extension cord is 6 ft minimum.
- One heavy-duty cord switch
- White ACRYLITE FF sheet
- 10 #6 1/2 inch Flat head wood screws
- Screws to mount the Undercabinet light fixtures
- 1 1/2 inch Drywall screws
Make A Light Table
Now, your child can enjoy hours of fun, play, and learning with this DIY light table. It can be used for color mixing, making shadows, examining x-rays, and more. The best part is that it’s made from a simple table, so you don’t need to spend a lot!
Bring this DIY project to your child’s life by measuring the top hole of the table. Next, get a piece of plexiglass cut to fit this size, and spray paint it with frosted glass paint, letting it dry overnight. Install the plexiglass into the table, ensuring it can’t be picked up. Arrange your light source within the drawer, thread the plug out the back, and cover the inside of the drawer with aluminum foil to enhance reflection. Use an LED light that doesn’t get warm. Plug in to use, but don’t leave it plugged in unattended.
Materials
- A shadow box picture frame
- LED light strip 5 meters with 300 LEDs
- Power supply
- Red & black wire
- Foam
- Female connector for power supply
- On-off switch
- A handle (optional)
- Rubber pads are also known as bumpers (optional)
ouch Sensitive Smart Table
Watch this complete video tutorial to create an artful DIY table that’s sure to impress your guests. The table uses epoxy, wood, and a lot of wire connections and circuits to create a honeycomb hexagonal design, with lights placed within that gently glow whenever someone touches that area. Your children will love playing with the table, as they’ll discover a bit of magic happening with every touch.
