10 DIY Laptop Stand Ideas You Can Build This Weekend
Ever felt your neck strain after hours in front of your laptop? Or your desk seems too cluttered? It’s time to make a change for the better! And you can do it yourself! Yes, you heard it right. This collection of DIY Laptop Stand Ideas is here to level up your workspace and comfort! Even better, you can do it on a budget. So, let’s get started and transform your workspace into a place that supports your goals and dreams with our exciting, easy-to-follow DIY laptop stand concepts!
DIY Laptop Stand Ideas
Whether chilling on the couch or sitting at a desk, it’s usually not ideal for resting a laptop directly on your lap. It can get hot, and the screen is always at an awkward angle. A laptop stand is a great way to improve your posture and keep you from slouching over your computer. You can find plenty of DIY laptop stand ideas online, but these 10 DIY Laptop Stand Ideas are easy to make, less costly, and make your working space a calming and stylish oasis. You can also customize them to match your style by painting or staining them or decorating them with washi tape. Let’s check them out!
Benefits of DIY Laptop Stand Ideas:
- Cost-effective: DIY projects are typically less expensive than buying pre-made solutions.
- Ergonomic: Customizing your stand means you can adjust the height and angle to fit your physical needs better.
- Space-saving: Organize and declutter your workspace by designing your stand with storage in mind.
- Aesthetically pleasing: Personalize your stand to match your taste, style, or the existing decor in your room.
- Creates a sense of accomplishment: There’s something deeply satisfying about using something you crafted yourself.
- Environmentally friendly: DIY projects often repurpose materials, reducing waste and promoting sustainability.
Laptop Stand Using Scrap Wood
This DIY Laptop Stand, crafted innovatively from scrap wood, offers a solution to neck and back discomfort by elevating your laptop to an ergonomically friendly eye level. This laptop stand makes your workspace a lot less cluttered, with space underneath for extra storage.
Start by cutting your boards as per your desired measurements. Next, attach a 1″ x 3″ board at a right angle to the 1″ x 4″ board. Continue attaching the rest of the 1″ x 3″ boards with a spacing of 3/4″ between them. Afterward, attach the second 1″ x 4″ board to the other end of the 1″ x 3″ boards. Once the construction is done, paint or stain it to your liking and finish it off by attaching metal corner braces.
Materials:
- Lumber cut per plans
- Miter saw
- Orbital sander
- Flat metal corner braces
- Color or stain of your choice.
- Wood glue
- Nail gun (or hammer)
- 1 1/4″ finish nails
DIY Laptop Stand For Bed
Enhance your comfort while using your laptop in bed with this homemade laptop stand. Designed to be simple, effective, and affordable, this stand can be assembled in approximately 30-60 minutes for around $15. The stand mitigates the discomfort and instability of balancing a laptop on your lap or chest.
Make this DIY project by cutting a wooden strip into four equal pieces. Round the corners of each piece, then drill holes through the pieces, aligning two at a time. Install hardware to create two working joints. Cut a large board into an 11×20 inch tray, adjusting the size based on your laptop. Create a lip using two small strips of the same board, attaching with nails and screws. Attach the legs to the tray. Finally, adjust the legs’ tightness to ensure stability.
Tools:
- circular saw
- Power drill
- (Optional) Dremel w/ sander bit
DIY Metallic Laptop Stand
The DIY metallic laptop stand is an affordable, easy way to personalize a home workspace. The laptop stand is created from a metallic document holder with excellent air circulation, keeping your laptop cool and elevating it to a comfortable typing angle.
Bring this DIY project to life by bending a metal mesh document holder to make the long sides flat, and position it upside down. Cut a rubber block into two pieces and glue them to the corners of the document holder using a glue gun. This helps prevent laptop slippage. Next, cut three bands of anti-slip liner and attach them to the edges of the document holder with double-sided tape. This prevents scratching and ensures the laptop stays in place. Now, you can enjoy your new laptop stand.
Materials:
- Metal Mesh Do cument Holder
- Roll of Anti-slip shelf liner
- A small block of rubber
DIY Laptop Stand With Wood
This DIY Wood Laptop Stand places a laptop on the same level as an external monitor, making it great for working at home when you’re using two screens. It has a strong oak top and fake metal legs, giving your workspace a nice look. The stand can hold almost any size laptop, lifting it about 3.5 inches above the desk to match the height of your other screen.
Get ready to unleash your crafting skills as you start by calculating the dimensions of the laptop for your custom stand. Once mapped, move on to carving out the desired shape from your chosen base. Bring the parts together to form a sturdy base and level the cut edges, creating a seamless facade. Choose a personalized finish, allow it to dry, and attach all components securely to end your build.
Materials:
- 1×2 board
- Wood glue
- Wood Filler
- Sand Paper
- (6) 1-1/4″ Pocket Hole Screws
- Stain
- Polyurethane
- Spray paint
DIY Monitor Stand
DIY Monitor Stand is the most creative, easy-to-use way to raise your monitor to align with other monitors. It is the perfect way to raise your laptop to eye level and align with other monitors. It elevates the monitor so that you’re not looking down for hours at a time, and it’s great for video conferences when friends look up your nose. This should be a great addition to your desk. This DIY stand can add years of life by improving posture and ergonomics while reducing neck, back, shoulder, and wrist pain. Monitor stands like these are selling on Amazon for $35+. You can build it yourself for less money.
Laptop Bubble Stand DIY
Discover the Laptop Bubble Stand, a blend of design and functionality in one DIY project. It features a sleek design and numerous cut-out circles that raise the glory of your workspace and promotes the cooling of your laptop. Try this project out today!
Start by preparing the main component for the cutting process. Once ready, cut the design carefully. Remove the circles that haven’t self-ejected. Proceed to clamp it in a specific way, measure, and execute the first bend. Repeat a similar process for the second bend. If any mishaps occur, particularly with your folds, rectify them by reheating and applying even pressure. Lastly, test your creation with your laptop to ensure functionality.
Materials:
- A 16″ x 16″ sheet of 1/8″ acrylic
- A heat gun
- A ruler
- Oven mitts
- Two quick clamps
- A workbench
- Some plywood scrap
- A laser cutter
PVC Laptop Stand DIY
Enjoy a comfortable workstation with this home DIY PVC laptop stand. This simple solution to an ergonomic workspace allows your laptop to sit at the ideal height and angle for comfort and saves desk space. This is the easiest to make a laptop stand you will ever see!
Without further ado, dive into creating an inclined support for your laptop. Begin with severing elements into required extents. Craft two platforms and thread your electrical wires through it, ensuring even bulky plugs fit snugly. Connect all portions together, purely relying on tight fits without resorting to bonding agents. Upon completion, set your laptop on your creation, observing its iconic tilt, much akin to a famous pop star’s dance style.
Materials:
- Six 5 1/2 ” by 3/4″ pieces
- Two 11″ by 3/4″ pieces
- Four Tee Joints
- Four Elbow Joints
DIY Laptop Stand For Bed
If you’re looking for an easy way to space out your neck and back muscles while still being able to type on your laptop in comfort, this DIY laptop stands for bed and is the answer. This DIY lap desk would be a fabulous gift for your parents, grandparents, or friends. So, make this bed laptop stand and be in love forever!
Begin your fun project by drawing the shape on foam and cutting it a bit smaller than the top. Stain the desk’s top and sides, if wanted, and wait for it to dry. Put foam on the bottom and attach it firmly. Double-check there are no staples sticking out to avoid snags. Cut away extra fabric, and for a neat look, join the border to the fabric’s edges. Allow it to dry, and finally, your handmade lap desk is ready to use.
Materials:
- Wooden lap desktop
- Foam square
- Fabric
- Trim
- Scissors
- Fabric glue
- Staple gun and staples
- Wood stain and brushes (optional)
DIY Foldable Laptop Stand
Learn to make a functional and durable laptop stand using the materials already in your hand. It offers six different angle adjustments for improved ergonomics and a comfortable viewing experience. Plus, it folds into a compact form for easy storage in a bag or backpack.
Join rulers together, creating four two-sided ones. Prior to joining, ensure the paint coating at the back is removed. Use clips to hold them during the drying process. Drill the adjustment screws at the 15, 17, 19, 21, 23, and 25cm positions. Add a hinge mechanism on top and connect the top and bottom with a hinge with inward-facing attachments when folded. Create two pivot parts using the same joining process and drilling holes, then assemble everything. The final steps include adding four bases at the bottom and two on top for laptop placement.
Materials:
- 30 cm Wooden rulers (with a width of 3.5cm)
- 30 cm Wooden rulers (with a width of 2.8cm)
- Screws (3.5mm diameter, length depends on ruler specification)
- Metal Hinge
DIY Folding Laptop Desk
If you have body aches from sitting uncomfortably while working, this DIY project can help. It will show you how to make a small, foldable laptop table that raises your laptop to a comfortable height. Click the link below, get ideas, and make your work easier with this DIY item for years to come.
This DIY Folding Laptop Desk is a simple and elegant way to create extra workspace while at home or while on the go. Building your laptop desk is a relatively easy project, and the design possibilities are endless. You will need to create a frame using plywood boards, including the bottom, sides, slats, and backing pieces. Once the frame is created, you’ll need to round up supplies like pocket hole screws, connecting bolts with caps, and white chalk paint. The power drill will be your best friend here as well.
Materials:
- 2″ x 12″ x 8′- 1 board
- 1″ x 2″ x 8′ – 2 boards
- 1 1/4 inch pocket hole screws
- 2 1/2 inch screws
- Expresso Minwax Stain
- Linen White Chalk Paint
- Connecting Bolts and Caps
- Matte Polyurethane
