7 DIY Barbell Holder Projects For Storing Heavy Weights
If you’re keen to spruce up your home gym, you’re in the right place. Welcome to this exciting and practical guide dedicated to DIY Barbell Holder Projects. No longer do you need to worry about your weights rolling around or taking up unnecessary space? You can now create your own bespoke barbell holder, designed to cater to your specific fitness needs. Not only will this save you money, but it also provides an opportunity to build something worthy of your sweat and efforts.
DIY Barbell Holder Projects
It’s time to bring a truly personal touch to your home gym setup with DIY barbell holder projects. The weights you lift shouldn’t just roll around haphazardly; they deserve a home of their own, created by you. That’s why we have gathered this amazing list of DIY barbell holder projects that’ll surely assist you and help you make the most useful storage options for gym equipment.
Weight And Barbell Storage Rack
The DIY Weight and Barbell Storage Rack is an excellent option for making your workout gear neat and easy to find. It has two parts, a lower place for weights and an upper shelf for other items. One cool part is the bar holders, which have special notches and holes to fit different barbells perfectly.
To create a DIY weight and barbell storage rack, gather 7x 2x4x8s and 1x 2x8x8 lumber, a pound box of 8×3″ wood screws (or alternatively, lag bolts), a circular saw, jig saw, 2″ hole saw, and a drill. Cut the lumber as the guide instructed, and assemble the bottom section using the cut pieces. Assemble the upper tray, creating an outer frame and placing the inside boards neatly. Attach the base of the uprights inside the front-to-back legs and connect the uprights with a 40″ piece for added rigidity.
- 1 pound box of #8 x 3″ wood screws
- (1x) 2″x8″x8′
- (7x) 2″x4″x8′
- Circular saw
- Jig saw
- 2″ hole saw
- Drill bit (if you like drilling pilot holes for the screws)
- Drill
DIY Barbell Rack Bar Storage
This DIY rack can be mounted on a wall, ensuring the floor space isn’t compromised. Created with cabinet-grade pine and PVC, the rack is resilient, functional, and carries an aesthetic appeal. One of its key features is its non-load-bearing design, allowing for bars to rest on the ground without straining the rack. This insightful DIY project guarantees a tidy gym space, encouraging an orderly workout environment.
To create a DIY barbell rack, first cut the PVC conduit into 2″ long pieces. Each piece forms a cup or “mouth” for the bars to rest in. These PVC cups should be spaced about 4″ apart on the pine board. The mending plates and flat head screws are used for attaching the PVC cups to the pine board, ensuring each cup is securely fixed. Once this component is assembled, it is time to mount it on the wall. Utilize wood screws to affix the constructed rack to wall studs, providing a secure base. Now, your rack is ready to store your bars.
Materials:
- 1″ x 3″ x ?’ Select Pine Board
- 1″ x 4″ x ?’ Select Pine Board
- 2″ PVC Conduit
- 2″ Zinc Countersunk Mending Plates
- #6 – 1″ Flat Head Philips Screws
- 3″ wood screws for mounting the top portion of the rack to the wall
DIY Barbell Holder For $50
This DIY project offers a robust yet uncomplicated design for storing barbells in gym spaces or homes, accommodating up to a dozen barbells comfortably. The holder’s simplicity ensures it’s not only affordable, costing approximately $50 in total, but it’s also easily adaptable to different needs.
Start by preparing four uprights at a preferred height and two 4′ long 2×4 boards. Secure the 4′ board so they’re flush with the uprights. The supports are then fastened to the base. A second 4′ board is attached at the top of the supports to form a frame. Add a stopper board at the base for the barbells to rest. Cut twelve 10″ PVC pieces and affix them using straps to the beams, ensuring they’re 2″ below the top of the 2×4. Finally, tighten down the straps and install your next round of PVC straps into the top horizontal support beam.
Materials:
- Lumber 2x2x8 – Quantity
- Lumber 1x3x8 – Quantity
- Drywall Screws or other types of Screws
Tool requirements:
- Hand Drill
- Drill Bits
- Saw
- Clamps
- Sandpaper
- Tape Measure
Barbell Storage DIY
This DIY project helps you smartly utilize all available space to arrange your barbells. The creative use of vertical storage keeps your bars tidy while maximizing your garage gym’s usable area. This innovative idea adds a new level of convenience to your exercise routine.
First, locate the ceiling studs using the stud finder. Next, drill the bike hooks into the studs, ensuring that they’re secure and have adequate spacing to store your barbells. Once installed, you can hang your barbells from the hooks, freeing up floor space and keeping your garage gym organized. Please note that using a stepstool may be necessary to access the barbells safely.
- Old Bike Hooks
- Drill
- Stud Finder
DIY Barbell Holders
In this video tutorial creator has constructed two different barbell holders for their new garage gym using solely 2x4s and screws. These affordable and sturdy holders add organization to their workout space, offering a convenient storage solution. Crafted entirely from readily available materials, these DIY holders exemplify resourceful planning and good use of minimalistic design for efficient storage.
Cheap DIY Barbell Storage
The video offers a comprehensive guide on different methods of creating an inexpensive and straightforward barbell storage solution. It begins by illustrating the wrong methods people often resort to in keeping their barbells, emphasizing the potential risks and damages such practices could lead to. The video then transitions into a step-by-step tutorial on how to craft an efficient barbell storage solution using affordable materials and tools. It emphasizes how efficient storage can help maintain the longevity of barbells, ensuring their safety and promoting an organized workout space.
How To Make Vertical Hanging Barbell Rack
This video provides a comprehensive tutorial on crafting a vertical hanging barbell rack. The creator details the process from start to finish, covering the materials needed, assembly, and installation. The guide emphasizes efficiency and safety, demonstrating how to design a rack that optimally stores barbells, makes the best use of space, and ensures easy reach and safe removal of the equipment.
