7 DIY Bumper Plate Storage For Home GYM

7 DIY Bumper Plate Storage For Home GYM

Are your bumper plates cluttering your workout area, leaving you with less space to hustle for your muscles? Say goodbye to the chaos because we’ve got you covered with insightful DIY bumper plate storage ideas. From easy-to-do projects using everyday household items to more ambitious plans involving a bit of carpentry, our solutions cater to different skills and needs.

7 DIY Bumper Plate Storage For Home GYM

DIY Bumper Plate Storage

By following our handy DIY bumper plate storage ideas, we empower you not just to build your own strength but to construct a space that fuels your daily grind. Creating your own storage solution not only saves you space and money but also nourishes a sense of accomplishment.

It’s time for you to take the frame of your surroundings into your own hands! Let’s not allow those bumper plates to lie around untidily anymore. Get ready to turn ordinary into extraordinary with our curated list of DIY ideas. Time to sweat the creativity out!

Quick And Dirty Plate Rack

Quick And Dirty Plate Rack

In this do-it-yourself guide, you will learn how to create a bumper plate storage rack using fast and simple wood. With a separate compartment for the big and small plates, this rack is perfect for keeping your bumper plates organized and tidy at home without purchasing costly frames.

Begin by assembling a frame using 2×6 pieces measuring 35 inches. Next, create a slot for a smaller change-rack by positioning a 1×4 piece within the frame. Ensure proper edge alignment before securing it in place. Attach the other 2×6 pieces, cut to 17 inches, to the frame to create dividers for different plate sizes. Finish by adding paint if you choose.

Materials: 

  • (6) 17″ lengths of 2×6″
  • (2) 35″ lengths of 2×6″
  • (2) 1″ x 4″ x 17″
  • (1) 1″ x 6.5″ x 17″ board
  • (2) 1.5″ lengths of 1×4″
  • 2″ and 3″ drywall screws (lots)
  • Drill, bits, Tape Measure, Square, Pencil

catalyst athletics

Mobile Bumper Plate Storage

Mobile Bumper Plate Storage

The DIY Mobile Bumper Plate Storage is a cost-effective solution to store and transport your barbell plates. One wheel comes with a brake to ensure stability. The design features a larger area for holding metal plates of varied weights, such as 10s, 5s, and 25s. This project is simple, requires less time, and is definitely worth the effort.

Begin by cutting the lumber into sizes for side, bottom, and cross-member supports. Assemble these parts together and secure them with deck screws. Establish an 18″ gap between the cross-member and bumper plate for easy loading and unloading. Attach the wheels to the base, one of them being a braked wheel to keep the rack from rolling away. Finish the rack with Pre-Stain and Stain for protection and a clean look.

Materials: 

  • Lumber (1-2x6x12 and 1-2x6x10)
  • 2 and 3-inch Deck Screws
  • 5 Wheels (3 Swivel and 1 Swivel with brake)
  • Pre-stain and Stain of your choice

yourdailyupgrade

 DIY Storage Bench

DIY Storage Bench

The DIY Bench with Bumper Plate Storage highlights a space-saving construction method for storing gym equipment while simultaneously doubling as a bench. The tutorial includes a detailed step-by-step guide on cutting and assembling the wood and optional upgrades such as adding paint or vinyl upholstery for a customized touch.

To make a DIY bench with bumper plate storage, gather these materials: one 4×8 plywood sheet, two 8-foot long 2x4s, two 48″ wooden dowels, and 32 wood screws. Cut the plywood into two 16×48 sections and cut the 2x4s into eight 19″ sections. Assemble the bench by attaching the 2x4s as support columns, using the plywood sections as the top and bottom. Insert the wooden dowels as stoppers inside to prevent weights from rolling out. Sand and paint as desired.

Materials: 

  • Two (2) 16″ x 48″ sections of plywood sheet
  • Eight (8) 19″ sections of 2″x4″
  • Two (2) 48″ wooden dowels
  • Thirty two (32) #8, 2 1/2″ wood screws

Tool list:

    • Drill / Driver
    • Circular Saw and/or Mitre Saw
    • Power Sander
    • Level
    • Tape Measurer
    • Hammer
    • Nail Gun (optional)

keeppulling

Easy Bumper Plate Storage

Easy Bumper Plate Storage

The DIY Weight Tree Bumper Plate Storage takes your disarrayed weight plates and creates an organized, easy-access structure. Crafted with the option to add swivel cast wheels, the storage rack can be easily transported within your garage gym, making cleaning or rearranging a breeze. Detailed instructions, including a shopping list, measurements, and assembly steps, make it a feasible weekend project.

In making this DIY weight tree, first, cut the 2×4 into two 50″ sections and seven 35″ pieces. Drill holes into the 50″ sections at 13 1/2″, 32 1/2″, and 45 3/4″ from bottom to top. Insert the pipes through the holes on both boards. Attach the 35″ pieces between the 50″ sections to form the upright. Form the base by making 26″ and 22″ cuts from the 4×4 and attaching them together. Attach the upright to the base with brackets.

Materials: 

  • (3) 3/4″ x 30″ Black Iron Pipe(s)
  • (1) 2″ x 4″ x 12′ Board
  • (1) Box Wood Screws, 2″
  • (2) Flat Plate Brackets 5″ x 3 1/8″
  • (1) 4″ x 4″ x 8′ Board
  • (1) 1″ x 6″ Speedbore Drill Bit (for drilling holes in 2 x 4)
  • (4) 4″ x 4″ Steel Post Base(s)
  • (4) 90 Degree Brace

Tools and Equipment: 

  • Circular saw capable of cutting 4″ x 4″ board
  • Corded or Powerful Cordless Drill

endofthreefitness

Bumper Plate Toaster Rack

Bumper Plate Toaster Rack

The DIY Bumper Plate Toaster Rack offers a fantastic solution for organizing and storing your bumper plates in a home gym setting, both economically and effectively. This storage system allows for the customization of compartments to accommodate your specific bumper plates, providing tailored organization for your workout space.

Plan the overall size of your Bumper Plate Toaster Rack considering the space for your weight plates. Cut your wood to suit the planned dimensions. Once done, start assembling by attaching the different pieces together. Make sure you screw them together tightly for enhanced stability. Keep in mind that you can modify the size and appearance according to your preference.

Materials Needed

  • 1×6’s (two or more 8 ft lengths)
  • 1 box 2″ deck screws
  • Measuring tape
  • Paper
  • Pencil
  • Power Drill with bits
  • A saw of some kind (I used a mitre saw)

upgradedragon

Customized Plate Storage

Customized Plate Storage

This innovative storage idea encourages you to utilize a simple pallet, which is often freely available, to organize your weight plates. You can also paint the pallet in a pattern you like, whether it’s a flag or a single colour. After setting up this affordable yet efficient storage system, arranging your weights becomes hassle-free, and your gym looks cleaner and more personalized than ever.

To create a DIY Space Weight Plate Storage, start by acquiring a pallet from a place such as Walmart or Home Depot. If you have difficulty finding a pallet, try searching on Craigslist, eBay, or OfferUp. Ensure the pallet is clean by spraying it with disinfectant and bug killer. Optionally, you can paint the pallet for an aesthetically pleasing finish. Once ready, place the pallet at a suitable corner of your home gym and stack your weights inside.

Materials: 

  • Pallet
  • Paint (Optional)
  • Paintbrush (Optional)

fringesport

DIY Bumper Plate Storage Rack

DIY Bumper Plate Storage Rack

Take advantage of this versatile storage solution and transform your gym into a more organized and spacious area for your workouts. Not only can it neatly store your weight plates, but it can also hold rings, resistance tubes, and other heavy gym equipment. It is a simple, sturdy piece designed to hang from your garage wall and conveniently store all of your weight.

Begin by securing the heavy-duty, powder-coated steel pegs to the wall using the provided mounting hardware. Anchor points at the top and bottom of each peg should be fastened into wall studs for maximum weight capacity (up to 120 lbs per peg). The pegs are slightly angled to ensure the safety of your weights, preventing them from falling down. You can decide the configuration based on your needs and available space.

Materials: 

  • 4 Wall Mounted Weight Plate Rack Pegs
  • Heavy duty powder-coated steel wall pegs with 120 lbs capacity
  • Mounting Hardware (for wood studs and masonry, including screws with protective rubber caps)

couponqueso

DIY Home Gym Weight Rack

DIY Home Gym Weight Rack

The DIY Home Gym Weight Rack for $30 by Jordan Jean is an affordable, space-saving solution for organizing weights in your garage. This homemade weight rack is a multi-level storage system perfect for bumper plates, kettlebells, slam balls, and various accessories. Moreover, the rack is finished with a coat of dark grey chalk paint, enhancing its aesthetic appeal.

First, plan the configuration of your weight rack and cut the 2x4s based on your weights’ measurements. Start by setting the base for bumper plates. Screw in cross bars to long parallel 2x4s. Then, build up multiple levels; set these an appropriate distance from the first to create enough clearance. Attach vertical 2x4s to the cross beams and add support pieces. Cut and install the plywood shelves. Finally, sand and optionally paint your rack.

Materials: 

  • 2 x 4 lumber (various lengths as per the design)
  • Plywood sheets (1/2 inch thick)
  • Deck screws (3-inch)
  • Nails (smaller size, 1.5-inch)
  • Chalk paint (optional)
  • Sandpaper

Click Here

22 Shares

Similar Posts