7 Free DIY Sawbuck Plans To Build You Own

Sawbuck is an easy and strong tool often used for cutting wood. It’s made from wood or metal and it lifts the wood off the ground, offering steadiness and taking pressure off the person using the chainsaw. Its X-design lets you cut in many places, making it perfect for fast and even cutting firewood. Whether you cut wood for a living or just for your own use, this tool is really helpful. Here’s a list of 7 Free DIY sawbuck plans to help you make one yourself. All these DIY projects are easy, use everyday tools, and will surely improve your wood-cutting skills.

DIY Sawbuck Plans And Ideas

The Free DIY Sawbuck Plans offer a simple and cost-effective solution for anyone seeking to streamline their woodcutting tasks. These woodworking plans guide users through constructing their sawbuck with comprehensive step-by-step instructions. They also present a great opportunity to utilize scrap wood, thus contributing to the betterment of the ecosystem. Additionally, these plans provide room for modifications such as painting, adding chains, or applying a polished finish, allowing you to personalize your sawbuck.

How tall should a sawbuck be?

A sawbuck, a supportive structure for cutting logs into firewood, should typically be around 4 feet (1.22 meters) tall. It is designed with six vertical 2×4’s or 2×6’s of 4 feet in length. The height allows users to cut the logs without bending too much, reducing strain on their backs. The height should be adjusted according to their preferences to ensure the sawbuck is comfortable for the user.

Build a Sawbuck in 5 Steps

Here’s a sturdy and efficient sawbuck from Instructables, designed to make cutting logs into firewood a breeze. The sawbuck’s design features a series of “X”s connected by braces, keeping them perfectly spaced apart to accommodate varying log sizes.

To make a sawbuck, start by cutting three 4x4s in half and drilling bolt holes in the marked points. Bolt them together to form three “X”s. Decide on the size of logs to cut and accordingly brace the Xs together. Place a scrap 2×4 on the top, measure spacing, and screw the 2×4 to the 4×4 for maintaining spacing. Add a bottom brace on each side, ensuring all is level and plumb. Create a spreader brace to determine the buck’s width. Lastly, modulate the top ends of the 4x4s for closer chainsaw cutting.

Tools Needed:

Circular saw
Drill/screw gun
Drill bits
Socket set
Tape measure
Square

CHECK INSTRUCTIONS HERE

10. Sawbuck Plan

This DIY sawbuck plan provides a practical and professional solution for those needing a reliable log sawhorse. Its most striking feature is its foldable design, meaning it saves on storage space and is easily transportable.

To build a sawbuck, first construct the legs by cutting the ends of the 2×4 beams as shown in the diagram and sand edges. Next, assemble the X-shaped legs by drilling pilot holes for each joint, using either a carriage bolt for a folding sawbuck or screws for a permanent one. Attach the 2×4 supports to both sides of the sawbuck and add 2×4 diagonal braces for extra rigidity. Finally, fit a string to the base of the X-shaped legs to maintain their position, and finish by checking for proper structure and applying paint or stain.

Tools Needed:

Hammer
Tape measure
Square
Miter saw
Drill/screw gun
Sander
Router

Sawbuck Plans

DIY Sawbuck Bench

Cutting wood has never been as straightforward and comfortable as with this DIY Sawbuck Bench. Constructed from sturdy 2x4s and featuring a foldable design, it raises logs for efficient slicing. Simple to build with common tools and pleasant to use, this bench is a practical solution to your woodcutting needs.

To construct a folding sawbuck bench, measure and mark six 2×4’s. Drill holes at the marked centers and bolt the boards into three pairs, with angled ends facing each other. Position the bolted legs 4′ apart on flat ground, centering the middle set, and lay a 2×4 at the 28″ measurement. Drill a pilot hole and insert a screw to provide a simple hinge point. Ensure alignment and secure the remaining screws. Repeat the steps for the other side. Lastly, fold the bench open and close for examination.

Tools Needed:

Saw, power drill
Phillips Screw Bit
Measuring Tape
Angle Square
Pen

mikesbackyardnursery

How To Build A Folding Sawbuck

Explore the ArboristSite thread featuring a folding sawbuck. Users discuss their experiences and views on sawbuck usage. They highlight its flexibility and usefulness in various tasks like chopping logs, creating cookie cuts, and recording videos.

To construct a folding sawbuck bench, first measure and mark six 2x4s for angled cuts and bolt-hole centers. Bolt the angle-cut 2x4s together in three pairs, with short ends facing each other. Position the bolted legs sidewise, keeping the middle set centered. Measure and mark a 2×4 for cross-support. Align the 2×4 under the marked line and drill a pilot hole at the corner. Attach a screw, ensuring everything is square and centered, then secure the remaining screws. Repeat on the other side, and check folding functionality.

Materials:

8) 4′ long 2×4’s
(12) 8 x 2-1/2 Galvanized Deck Screws
(3) 4” x 1/4” stainless bolts
(6) 1/4” washers
(3) 1/4” nuts

arboristsite

DIY Easy Sawbuck

It’s an exceptionally practical and efficient structure with a folding design, perfect for both experienced woodworkers and beginners. Offering an optimal height to relieve back strain and an adjustable opening at the top for various diameters of logs, it is particularly user-oriented.

Start by cutting 5 of the 2x4s in half at 4’ long, and angle your saw to 30 degrees. Cut a 30-degree angle on 6 of the 4’ pieces, which will serve as legs. At 19″ from the top, drill holes for the bolts to join the legs. Ensure the long points on the angles are opposite when assembling. Attach a support piece 25-1/2″ up from the angled leg – ensure it’s square before securing with screws. Attach a second support piece identically. The sawbuck is ready for use.

Materials:

5 – 2x4s @ 8’ Long
3 – 3/8” x 4” Long Carriage Bolts
3 – 3/8” Washers
3 – 3/8” Wing Nuts

3x3custom

Folding Sawbuck Plans

Here’s an easy-to-follow and cost-efficient approach to building a stable, folding sawbuck with the sawbuck plans. The open V-shaped structure provides an ideal base to securely cut logs, ensuring they are above ground and safeguarding your chainsaw from possible dirt encounters.

Start by cutting six of the 2×4’s at a 30-degree angle on one end, not reducing their length. On each, measure 18 inches from the 90-degree edge and drill a straight 5/8 inch hole in the center. Then assemble 3 “X”-shaped crosses using bolts, washers, and nuts. Secure the nuts tightly, but let the “X” open/close freely. Mark a line 19 1/4 inches down on each flat X. Using the screws, fix a 2×4 along the line of each X. Attach another 2×4 to each side and finally, fix a second 4×2 on each side, enhancing strength.

Materials:

Five 8 foot 2x4s cut into ten 4-foot lengths
Three 5-inch 5/8 bolts
Six 5/8 washers
Six 5/8 nuts
3 1/2 inch outdoor screws
Dewalt lithium-ion impact driver

CHECK INSTRUCTIONS HERE

Sawbuck Plan

Try the Sawbuck plan if you’re looking for a fun and easy project. This plan gives you an easy-to-follow guide to build your own sawbuck using simple tools. It’s a fun one-day project that’s also useful.

Start by constructing the legs for the sawbuck, ensuring they’re straight and in good condition. Using a circular saw, make the cuts as marked. Next, build the X-shaped supports, securely locking the components together with C-clamps. Now, evenly space out the three X-shaped supports before affixing the wooden braces to them. Ensure supports are plumbed, and braces are firmly attached to craft sturdy joints. Lastly, take care of any finishing touches, including filling pilot holes with putty and smoothing the surface.

Tools Needed: