7 Budget Friendly DIY Owl House Plans
Looking to build a safe shelter for the owls in your backyard? Look no further than these DIY Owl House Plans. Whether a novice or an experienced DIY lover, this series provides comprehensive plans and designs to help you construct a cozy shelter to protect and attract these feathered friends. Start building today and enjoy the beauty and majesty of owls in your backyard.
DIY Owl House Plans Free
Constructing a DIY owl house in your backyard can serve two purposes. Firstly, it is a kind gesture towards wildlife, and secondly, it is a nature-friendly solution to control pests. Owls are known to eliminate various pests, contributing to a healthier outdoor environment. Therefore, it is recommended to designate a specific spot in your space for these beautiful birds. You can use these free plans to set up an ‘Owl-friendly’ home today.
Selecting the Ideal Location For Owl House
Choosing the right location is key to attracting owls to your owl house. Here are some factors to consider:
- Security: Owls prefer areas that are safe from potential predators. Make sure the location is secure and free from threats.
- Quietness: Owls thrive in quiet and peaceful environments. Avoid placing the owl house in noisy and busy areas.
- Food Availability: An area rich in small mammals, the main food source for most owls, can be particularly attractive to them.
- Tree Coverage: Owls prefer locations with plenty of tree coverage for extra protection.
- Height: Generally, owl houses should be placed high in a tree or on a pole for optimum owl accessibility.
How To Make A Barn Owl House
Imagine a cozy refuge for barn owls right in your backyard! This nest box adds an appealing element to your outdoor space and provides a haven for barn owls. It’s a splendid chance to witness these majestic creatures up close while protecting them from potential predators. You’re not just building a house; you’re crafting a sanctuary for these beautiful feathered companions!
Making:
The process of creating this nest box begins with the careful measurement of wood. Size it to around 18 by 18 inches, but remember, perfection in dimensions isn’t necessary — barn owls don’t mind a slight variation! After cutting, smooth the wood with sandpaper to prevent any harm to the owls. A hole for the entrance should be made, not too large, but ample space for the owl to pass through. It’s an essential part of their new home. Stick the wood pieces together, and voila! Your barn owl house is ready!
Materials:
- Safety goggles
- Hand saw
- Ruler
- Pliers
- Screwdriver or portable drill
- Sandpaper
- Wood (less than 18 by 18 inches)
DIY Screeching Owl House
A DIY Screeching Owl House is a charming personal space for night-time feathered friends. Owls find comfort and security here. You’ll see the beauty of these majestic creatures in your backyard. Not only that, but you’re also playing a part in preserving these alluring species!
Making:
Creating a Screeching Owl House is a pleasant task. Wood planks are cut to the needed sizes, with a 10×10 slab for the base and 15-inch slabs to form the exterior. The entrance for the owls is then prepared on a front piece, which is a door with a half-circle cut. This door also has grooves inside to aid the owl’s climb. The parts are assembled with wood screws, and the house gets a top amount from the 10×10 slab. A weatherproof spray adds to the exterior, giving the place a long-lasting finish.
Materials:
- Tools such as drills and saws
- A wood plank of 10×9.25 inches
- A wood plank of 1×12 inches
- Half-inch wood screws
- Wood glue
- Weatherproofing spray
DIY Owl House Plans
In the heart of every nature lover resides an affection for owls, and the ‘DIY Owl House Plans’ provide an appealing shelter for these mesmerizing creatures. This handmade owl house offers a haven for the owls and lends a rustic charm to your outdoors. It’s a perfect retreat for owls that helps them feel secure and loved in a setting replicating their natural habitat.
Making:
Step one involves cutting the cedar plank into requisite parts – the bottom, sides, ends, and top pieces. Measure the center of one end piece, and mark a 45-degree angle on both edges to cut the roof angle. Drill a 3-inch diameter entrance hole on the top of the front panel using a spot saw or a jigsaw. Then assemble the house by attaching the front, back, and bottom pieces and a side piece with a hinge-like mechanism using screws. Finally, attach the roof pieces and the mounting board. Once done, your lovely owl house is ready to grace your backyard. Go warmly welcome the owls in your surroundings by embarking on this fulfilling project!
Materials:
Here’s the list of all you need to start:
- Western Red Cedar: One 1x8x8, One 2x2x6, and One 1x2x20 for mounting
- Sixteen Gauge Galvanized Finish Nails: Approximately 50
- Galvanized Wood Screws: Approximately 10, 1 1/2 inches long
DIY Screech Owl Nest Box Build
A DIY Screech Owl Nest Box is perfect for bird enthusiasts who want to provide a safe nesting space in their backyard for these captivating creatures. Eastern and Western Screech-owls will appreciate this thoughtful gift, as it contributes to their conservation by offering a shelter where they can lay their eggs and raise their young. So, embrace this nest box and enjoy the invaluable opportunity to observe and protect these magnificent birds.
Making:
Constructing a Screech Owl Nest Box is an enjoyable and fulfilling activity. Start by cutting the wood pieces according to the dimensions, making sure the entrance hole is appropriately sized for the owls to enter. Remember to make drain holes on the floor piece and kerf cuts on the exterior. Next, assemble the parts by attaching the sides to the backwork, then join the floor piece. Be sure to recess the floor by half an inch to avoid water leakage. Attach the pre-drilled front piece to the sides and bottom while ensuring a snug fit with the roof. Finally, secure the roof piece and add two hinges to open the top for cleaning.
Materials:
- One 1x10x8 cypress or cedar board (3/4″ thick)
- Two 1 1/2×1 1/2 exterior hinges with hinge screws
- Approximately thirty 2″ exterior-grade deck screws
DIY Owl House
Creating a home for owls in your backyard is a true joy. Owls help maintain a balance in the ecosystem by controlling rodents, and observing them can turn your backyard into your personal wildlife sanctuary. The DIY Owl House gives these marvelous birds a safe and cozy shelter to thrive within.
Making:
Making a DIY Owl House is easy and rewarding. Begin by cutting the wood into suitable sizes for the top, bottom, and sides and two circles for the owl’s house opening. You can use a jigsaw to cut out the circle for the box. Using a solid glue, carefully attach the sides to the top and bottom wood pieces. Once done, create a small hole that matches the size of a skinny cylinder. This will serve as a perch for the owls. Allow ample time (at least 30 minutes) for the house to dry. Lastly, bring the owl house to life by painting it with a mix of green, black, brown, and white paints to resemble a natural habitat.
Materials:
- A pack of 2 inch Nails
- 3 pieces of 36×36 plywood
- Green, white, brown, black Paint (Optional)
- Hammer
- Sandpaper
- Jigsaw
- 36 1×1 pieces of poplar wood
- 0.5×6 wooden cylinder
DIY Recycled Owl House
Creating a DIY Recycled Owl House is the perfect way to house owls right in your outdoors. It gives safety and shelter to these mesmerizing creatures while allowing you an up-close and personal experience with nature. Using what’s already available is an excellent nod towards supporting the environment and creating a balance. You’re preserving nature and caring for these splendid creatures elegantly!
Making:
Even the process of making a recycled owl house is friendly and exciting. Start by selecting logs or posts that have hollow elements. Then, cut these posts to the required length. The top is slightly cropped at an angle for water runoff, maintaining a dry space for the owls. The inside hollowness becomes a cozy nesting area. Once the post is prepared, attach wood planks at its top and bottom for solidity. Use all-thread to secure the top and bottom pieces with each other, giving your recycled owl house stability. Lastly, add a wooden plank at the back so it can be fixed to a tree. Then, locate your owl house on a tree appropriately.
Materials:
- A hollow post or log
- A 2×8 inches wood board
- A 1×4 inches wood board
- 8-12 pieces of 3 inches wood screws
- A piece of all-thread
- four nuts and washers fitting the all-thread
DIY Owl House With Cedar Board
This splendid Owl House, made from a Cedar Board, is an attractive option for owls searching for a comfy nest. It’s a great addition to a backyard, helping you draw in and support these beautiful birds. From a practical angle, providing this DIY housing can enable you to offer shelter to owls that help manage rodents in your surroundings. It’s you joining hands with nature in a beautiful way.
Making
Building this Owl House is easier than you might think! After carefully marking and cutting the cedar board, an entrance hole is created at the center of the front panel. The pieces are assembled, forming a snug box with an unpainted cedar finish that weathers naturally over time. The last step involves attaching this simple yet spectacular Owl House to a tree or a pole, about 10-15 feet off the ground. You have provided a unique space where owls can take up residency.
Materials
- An 8-foot-long, 1-by-10-inch Cedar Board
- A Box of 1-inch Wood Screws
- A Set of two 1-inch Hinges
- Tools like a Miter Saw or Circular Saw, Measuring Tape, Framing Square, Straight Edge, Cordless Drill, Spiral Bit Set, Driving Bit Set, a 3-inch Hole Saw Bit
- Sandpaper
- Safety Glasses and Work Gloves
