7 DIY Dog Ramp Plans For Under Healed Canine
Our amazing DIY Dog Ramp ideas are a custom-made solution that is not only super rewarding to create but also adds to your dog’s comfort, especially those aging, small, or dealing with joint issues. Follow our list of simple do-it-yourself dog ramp ideas and assemble a functional work of art from the comfort of your home. It’s about to get messy, fun, and profoundly satisfying as you contribute to your pooch’s happiness and the well-being of your canine.
Easy DIY Dog Ramps For Injured Canines
Welcome to our amazing list of DIY dog ramp ideas to help the canine serving with aging problems, injured, or smaller-stature dogs navigate heights and stairs. The projects featured here are designed to help you create accessible and comfortable spaces for your canine friends. Offering a unique blend of simplicity, functionality, and design, they perfectly align with your home decor and dog’s needs.
Easy IKEA Ramp
This DIY project is an excellent idea, especially for pet owners with small dogs like Dachshunds, which might struggle to reach high beds. The box can be used for storing items, and it also has a hook and loop tape for fastening and hinges for adjusting the ramp incline.
Firstly, assemble a Prant 13X13X15 box. Then, cut a Tryggve shelf to be flush with the box’s height. Attach this cut shelf to a second Tryggve shelf using two small hinges. Use a self-adhesive hook and loop tape to attach this setup to the box. Afterward, cut up two Borris carpets and, using household goop, glue them onto the ramp and the box’s top. Allow it to dry before use.
Materials:
- Prant Box
- Borris rug (x2)
- Ekby Tryggve shelf (x2)
- Hook and loop tape
- Hinges
- Goop glue
- Heavy-duty scissors
Beautiful Pet Steps
This functional DIY pet step is your pet’s key to easy access to high-reach zones. Having a sturdy and durable frame, humans can also use it to reach the high stages. Suitable for beginners and intermediate DIY enthusiasts, this easy-to-follow guide takes about 3 hours to construct.
Cut 1×2 and 1×6 pieces using a miter saw and the plywood into three parts. Mark and cut each side piece at an angle, then attach riser cleats using glue and finish nails. Attach all the cleats similarly, using a speed square for accuracy. Attach risers and treads accordingly, ensuring enough space for a support bar at the top rear part. Insert the support bar and attach trims where needed with glue and finish nails. Line the steps with fabric over a rubber drawer liner as an optional step.
Materials:
- Birch Plywood
- 1″ x 2″ x 8′ board
- 1″ x 6″ x 6′ board
- ½” x 2″ x 4′ Boards
- Wood Glue
- 1-inch Finish Nails
- ¾”-inch Finish Nails
- Fabric
- Drawer Liner
- Hand Stapler
- 3/8-inch staples
Doggie Bed Ramp With Smart Storage
The Doggie Bed Ramp from HGTV is a creative, functional design featuring smart storage integration. Ideal for aging dogs or smaller in size, it eases reaching the bed, sparing your pet’s joints from pain or discomfort. The best part is that it can be a great way to show your decorative pieces and blankets.
Measure your bed and select different-sized wooden crates sturdy enough to support your pet. Stack the crates in a star-shaped pattern, ensuring the top one sits slightly below the bed. Once you figure out the arrangement, bond them together using wood glue and nails. Add a custom-cut wooden piece on the top crate for safety. For the ramp, cut a 1×10 board to fit the crate height, wrap it in a rug for traction, and attach it to the top crate using a hinge mechanism. Add personal touches for flair.
Materials:
- Measuring tape
- Crates in various sizes
- Wood glue
- Drill and bits
- Hammer
- Nails
- 1×10 board
- Door hinge and hardware
- Small rug
- Carpet tape
- Miter or circle saw
- Pencil
Collapsible Dog Ramp
The DIY Dog Ramp is a dream for small or arthritic dogs struggling to jump on furniture. Having a sleek and stylish design, it can be painted in the theme to match your furniture or the color you like. Plus, with a handy collapsible design, this ramp can be stored away easily when unused.
Cut parts using a jigsaw, assemble a box with a 14-inch crosspiece, and drill holes for detachable legs. Shape the legs, attach a crosspiece, and fill seams with wood putty, sand, prime, and paint all pieces. Attach a handle block, fix a piano hinge to the box and lid, and install the toy box hinge and a folding hinge. Fasten a drawer pull to assist in lifting, add non-slip strips to the legs, and put a sisal rug on the lid with contact cement for grip and finish.
Materials:
- 1×12 laminated shelving board
- 1×5 boards
- 1 5/8-inch trim head screws
- 3/8-inch, 2-inch bolts
- 3/8-inch washers
- 3/8-inch locking nuts
- Wood glue
- Wood filler
- Piano hinge
- Folding door hinge
- Toy box lid supports
- Drawer pull
- Nonskid rubber strips or pads
- Latex primer
- Latex semi-gloss paint
- Contact cement
- Non-skid sisal rug
- Coffee can for tracing
Check out the full instructions here.
Super DIY Dog Ramp
The DIY Dog Ramp is a perfect solution for dogs with mobility issues. Designed thoughtfully to minimize jumping, the ramp assists dogs in moving on and off high beds efficiently. Constructed in around 4 hours with around $60, the ramp is a cost-effective alternative to store-bought ramps. It creates an easy climb with a non-slip carpet cover, and you can paint it for an enhanced finish.
To create the DIY dog ramp, measure and sketch your design based on the desired height and angle. Cut the plywood pieces according to the layout and assemble the ramp using support beams and screws. Remember to sand the surfaces properly for a smooth finish. Next, paint the ramp with your desired color and allow it to dry. Lastly, attach the carpet to the ramp’s walking surface using carpet seam tape to provide your pet a comfortable, non-slip surface.
Materials:
- One 4×8 sheet of Plywood
- One 2×2 8-foot strip (for support beams)
- Circular Saw
- Power Drill
- Screws
- Measuring Tape
- Pencil
- Sand Paper
- Paint
- Paint Brushes/Roller
- Carpet
- Carpet Tape
Irresistible Pets Ramp Instructions
3D Instructions
Use this step-by-step guide to build a tailored dog ramp that suits your pet’s needs. It features an adjustable, durable ramp that can be built with basic materials and tools. Highlighting the importance of careful planning and safety, it offers a solution that controls costs while maintaining a professional finish.
In building a DIY dog ramp, construct the base and support structure using precise measurements and angles. This is followed by the formation of the front legs with careful assembly. Once completed, build the frame, ensuring all parts align correctly. Proceed to install side rails, incorporating waterproof glue for structure stability. Attach fitted cleats to both sides of the rails. Finally, install a pre-cut plywood ramp to the structure, followed by a fine finish with sandpaper and fitting a carpet covering over the exterior.
Materials:
- Lumber (1×3 and 1×1)
- Plywood (3/4 inch)
- Carpet
- Screws
- Glue
- Stain
- Wood filler
Basic Ramp By Instructables
Use this step-by-step guide to build a tailored dog ramp that suits your pet’s needs. It features an adjustable, durable ramp that can be built with basic materials and tools. Highlighting the importance of careful planning and safety, it offers a solution that controls costs while maintaining a professional finish.
To build a bed ramp for a small/older dog, start by designing the ramp structure considering a gentle slope. Cut out the pieces: the ramp, landing, and supports. Sand down all edges until smooth. Assemble the structure carefully, ensuring all sections are square and flush. Attach a small cleat to provide additional stability. Lastly, cover the top landing and the ramp with carpet to provide your pet a comfortable, non-slip surface.
Materials:
- (2) sheets of 1/2 inch plywood
- small nails or screws
- Carpet scraps for ramp and landing
